Skip to main content

Ethernet

Introduction​

The Omega2 features a 10/100M Ethernet port for wired networking.

Hardware​

The Omega2 has a single 10/100M integrated Ethernet Physical Layer (PHY).

The Ethernet pins are highlighted on the Omega2/2S diagrams below.

omega2-pinout ethernet-pins

See the Omega2S hardware design guide for more information and recommendations on designing boards with Ethernet.

Software​

The Ethernet port can be configured to be a client or a Dynamic Host Configuration Protocol (DHCP) host. It is set to client mode by default.

For more information on Ethernet networking, see the Ethernet networking article.